CHS054 Large Rendered Cottage

This is a solid cast concrete model, it has had some chimney pots added and a cross wall support for an enhanced look, the paint job really sets this model off nicely. 

CHS052 Small Stone Cottage

This is a great lineside building, it could be used as a platelayers hut as well as a small cottage, this is a cast concrete model. Comes unpainted or painted.

CHS033 'Slate Workman's Cottage' This is a great little cottage, it is quite typical of a small cottage seen around Wales, it looks great pretty much anywhere and a few different paint schemes will add some variety. It has a door and window at the front and a window to the rear. Height to top of chimney – 9.5” Length – 7.5” Width – 5”

CHS034 'Late Dormer Window' This dormer window is an ‘add-on’ for the workman’s cottage and comes unpainted, all is required is a waterproof grout or strong outdoor glue to fix to the roof. A thin layer of mortar can be used if required. Height – 4.5” Width – 3” Length – 4”

CHS035 'Slate Lean-to' This Lean-to is moulded in one piece and can be attached to the workman’s cottage or left free standing against a quarry face etc. Height – 4.5” Width – 3” Length – 4”

CHS036 'Slate Cottage Extension' This extension can be used on the standard cottage as an ‘add on’ or as a stand-alone piece. Height to top of chimney – 8.5” Length – 5” Width – 4.5”

CHS072 'Small Rendered Dormer Extension' This extension can be used on the standard cottage (as in the photo) or anywhere else that you might have a home for it. It has a small part of the render missing at the bottom for character, the slate is detailed underneath Height – 5.5” Depth – 2.2” Width – 3”

CHS037 'Slate Cottage W/Extension' This building comes pre-joined so eliminates the requirement to fix together, comes in any specification for colour schemes. Add a dormer or two to really enhance it. Height to top of chimney – 9.5” Length – 13” Width – 5”

CHS038 'Country Cottage' This cottage is 2 x cottage extensions joined together and a couple of dormers added, it comes pre-assembled and painted but if you prefer the challenge and want to build your own, you can buy the parts separate. Choose the colours when you order. Height to top of chimney – 8.5” Length – 10” Width – 4.5”

CHS070 'Large Cottage' This cottage is a cut down version of the Slate station building with a Lean-to and a chimney breast added, it comes pre-assembled and painted and you can choose the colours when you order. Height – 8” Width – 5.5” Length – 12.5”

CHS039 'Resin Shop Front' This add on is a great feature to change the appearance of the cottage, it comes as a standard piece like the front of the cottage, you can saw additional windows off of the facing piece to create a wrap- around effect. The picture shows an additional side piece added, this is made from Resin and can be easily glued on. Length – 19.5cm Height – 10cm

CHS040 'Cottage W/Dormer' This model come pre-assembled with the dormer at an extra cost, can be supplied unpainted or painted

CHS041 'Cottage W/2 x Dormer' This model come pre-assembled with the two dormers at an extra cost, can be supplied unpainted or painted

CHS042 'Cottage W/Lean-to' This model come pre-assembled with the Lean-to at an extra cost, can be supplied unpainted or painted

CHS043 'Cottage W/Lean-to at Rear' This model come pre-assembled with the Lean-to on the rear at an extra cost, can be supplied unpainted or painted

CHS044' Cottage W/Lean-to & Dormer' This model come pre-assembled with the Lean-to & Dormer at an extra cost, can be supplied unpainted or painted

CHS046 'Cottage W/Lean-to, Extension & Dormer' This model come pre-assembled at an extra cost, can be supplied unpainted or painted